| ISP-A-P1 |
Hardware |
VerifyEnvironmentCooling |
Verifies the status of power supply fans and all fan trays. |
⏭️ Skipped |
VerifyEnvironmentCooling test is not supported on vEOS-lab |
| ISP-A-P1 |
Hardware |
VerifyEnvironmentPower |
Verifies the power supplies state and input voltage. |
⏭️ Skipped |
VerifyEnvironmentPower test is not supported on vEOS-lab |
| ISP-A-P1 |
Hardware |
VerifyEnvironmentSystemCooling |
Verifies the device's system cooling status. |
⏭️ Skipped |
VerifyEnvironmentSystemCooling test is not supported on vEOS-lab |
| ISP-A-P1 |
Hardware |
VerifyInventory |
Verifies the physical hardware inventory of the device. |
⏭️ Skipped |
VerifyInventory test is not supported on vEOS-lab |
| ISP-A-P1 |
Hardware |
VerifyTemperature |
Verifies if the device temperature is within acceptable limits. |
⏭️ Skipped |
VerifyTemperature test is not supported on vEOS-lab |
| ISP-A-P1 |
Hardware |
VerifyTransceiversManufacturers |
Verifies if all the transceivers come from approved manufacturers. |
⏭️ Skipped |
VerifyTransceiversManufacturers test is not supported on vEOS-lab |
| ISP-A-P1 |
Hardware |
VerifyTransceiversTemperature |
Verifies if all the transceivers are operating at an acceptable temperature. |
⏭️ Skipped |
VerifyTransceiversTemperature test is not supported on vEOS-lab |
| ISP-A-P2 |
Hardware |
VerifyEnvironmentCooling |
Verifies the status of power supply fans and all fan trays. |
⏭️ Skipped |
VerifyEnvironmentCooling test is not supported on vEOS-lab |
| ISP-A-P2 |
Hardware |
VerifyEnvironmentPower |
Verifies the power supplies state and input voltage. |
⏭️ Skipped |
VerifyEnvironmentPower test is not supported on vEOS-lab |
| ISP-A-P2 |
Hardware |
VerifyEnvironmentSystemCooling |
Verifies the device's system cooling status. |
⏭️ Skipped |
VerifyEnvironmentSystemCooling test is not supported on vEOS-lab |
| ISP-A-P2 |
Hardware |
VerifyInventory |
Verifies the physical hardware inventory of the device. |
⏭️ Skipped |
VerifyInventory test is not supported on vEOS-lab |
| ISP-A-P2 |
Hardware |
VerifyTemperature |
Verifies if the device temperature is within acceptable limits. |
⏭️ Skipped |
VerifyTemperature test is not supported on vEOS-lab |
| ISP-A-P2 |
Hardware |
VerifyTransceiversManufacturers |
Verifies if all the transceivers come from approved manufacturers. |
⏭️ Skipped |
VerifyTransceiversManufacturers test is not supported on vEOS-lab |
| ISP-A-P2 |
Hardware |
VerifyTransceiversTemperature |
Verifies if all the transceivers are operating at an acceptable temperature. |
⏭️ Skipped |
VerifyTransceiversTemperature test is not supported on vEOS-lab |
| ISP-A-P3 |
Hardware |
VerifyEnvironmentCooling |
Verifies the status of power supply fans and all fan trays. |
⏭️ Skipped |
VerifyEnvironmentCooling test is not supported on vEOS-lab |
| ISP-A-P3 |
Hardware |
VerifyEnvironmentPower |
Verifies the power supplies state and input voltage. |
⏭️ Skipped |
VerifyEnvironmentPower test is not supported on vEOS-lab |
| ISP-A-P3 |
Hardware |
VerifyEnvironmentSystemCooling |
Verifies the device's system cooling status. |
⏭️ Skipped |
VerifyEnvironmentSystemCooling test is not supported on vEOS-lab |
| ISP-A-P3 |
Hardware |
VerifyInventory |
Verifies the physical hardware inventory of the device. |
⏭️ Skipped |
VerifyInventory test is not supported on vEOS-lab |
| ISP-A-P3 |
Hardware |
VerifyTemperature |
Verifies if the device temperature is within acceptable limits. |
⏭️ Skipped |
VerifyTemperature test is not supported on vEOS-lab |
| ISP-A-P3 |
Hardware |
VerifyTransceiversManufacturers |
Verifies if all the transceivers come from approved manufacturers. |
⏭️ Skipped |
VerifyTransceiversManufacturers test is not supported on vEOS-lab |
| ISP-A-P3 |
Hardware |
VerifyTransceiversTemperature |
Verifies if all the transceivers are operating at an acceptable temperature. |
⏭️ Skipped |
VerifyTransceiversTemperature test is not supported on vEOS-lab |
| ISP-A-P4 |
Hardware |
VerifyEnvironmentCooling |
Verifies the status of power supply fans and all fan trays. |
⏭️ Skipped |
VerifyEnvironmentCooling test is not supported on vEOS-lab |
| ISP-A-P4 |
Hardware |
VerifyEnvironmentPower |
Verifies the power supplies state and input voltage. |
⏭️ Skipped |
VerifyEnvironmentPower test is not supported on vEOS-lab |
| ISP-A-P4 |
Hardware |
VerifyEnvironmentSystemCooling |
Verifies the device's system cooling status. |
⏭️ Skipped |
VerifyEnvironmentSystemCooling test is not supported on vEOS-lab |
| ISP-A-P4 |
Hardware |
VerifyInventory |
Verifies the physical hardware inventory of the device. |
⏭️ Skipped |
VerifyInventory test is not supported on vEOS-lab |
| ISP-A-P4 |
Hardware |
VerifyTemperature |
Verifies if the device temperature is within acceptable limits. |
⏭️ Skipped |
VerifyTemperature test is not supported on vEOS-lab |
| ISP-A-P4 |
Hardware |
VerifyTransceiversManufacturers |
Verifies if all the transceivers come from approved manufacturers. |
⏭️ Skipped |
VerifyTransceiversManufacturers test is not supported on vEOS-lab |
| ISP-A-P4 |
Hardware |
VerifyTransceiversTemperature |
Verifies if all the transceivers are operating at an acceptable temperature. |
⏭️ Skipped |
VerifyTransceiversTemperature test is not supported on vEOS-lab |
| ISP-A-P5 |
Hardware |
VerifyEnvironmentCooling |
Verifies the status of power supply fans and all fan trays. |
⏭️ Skipped |
VerifyEnvironmentCooling test is not supported on vEOS-lab |
| ISP-A-P5 |
Hardware |
VerifyEnvironmentPower |
Verifies the power supplies state and input voltage. |
⏭️ Skipped |
VerifyEnvironmentPower test is not supported on vEOS-lab |
| ISP-A-P5 |
Hardware |
VerifyEnvironmentSystemCooling |
Verifies the device's system cooling status. |
⏭️ Skipped |
VerifyEnvironmentSystemCooling test is not supported on vEOS-lab |
| ISP-A-P5 |
Hardware |
VerifyInventory |
Verifies the physical hardware inventory of the device. |
⏭️ Skipped |
VerifyInventory test is not supported on vEOS-lab |
| ISP-A-P5 |
Hardware |
VerifyTemperature |
Verifies if the device temperature is within acceptable limits. |
⏭️ Skipped |
VerifyTemperature test is not supported on vEOS-lab |
| ISP-A-P5 |
Hardware |
VerifyTransceiversManufacturers |
Verifies if all the transceivers come from approved manufacturers. |
⏭️ Skipped |
VerifyTransceiversManufacturers test is not supported on vEOS-lab |
| ISP-A-P5 |
Hardware |
VerifyTransceiversTemperature |
Verifies if all the transceivers are operating at an acceptable temperature. |
⏭️ Skipped |
VerifyTransceiversTemperature test is not supported on vEOS-lab |
| ISP-A-P6 |
Hardware |
VerifyEnvironmentCooling |
Verifies the status of power supply fans and all fan trays. |
⏭️ Skipped |
VerifyEnvironmentCooling test is not supported on vEOS-lab |
| ISP-A-P6 |
Hardware |
VerifyEnvironmentPower |
Verifies the power supplies state and input voltage. |
⏭️ Skipped |
VerifyEnvironmentPower test is not supported on vEOS-lab |
| ISP-A-P6 |
Hardware |
VerifyEnvironmentSystemCooling |
Verifies the device's system cooling status. |
⏭️ Skipped |
VerifyEnvironmentSystemCooling test is not supported on vEOS-lab |
| ISP-A-P6 |
Hardware |
VerifyInventory |
Verifies the physical hardware inventory of the device. |
⏭️ Skipped |
VerifyInventory test is not supported on vEOS-lab |
| ISP-A-P6 |
Hardware |
VerifyTemperature |
Verifies if the device temperature is within acceptable limits. |
⏭️ Skipped |
VerifyTemperature test is not supported on vEOS-lab |
| ISP-A-P6 |
Hardware |
VerifyTransceiversManufacturers |
Verifies if all the transceivers come from approved manufacturers. |
⏭️ Skipped |
VerifyTransceiversManufacturers test is not supported on vEOS-lab |
| ISP-A-P6 |
Hardware |
VerifyTransceiversTemperature |
Verifies if all the transceivers are operating at an acceptable temperature. |
⏭️ Skipped |
VerifyTransceiversTemperature test is not supported on vEOS-lab |
| ISP-A-P7 |
Hardware |
VerifyEnvironmentCooling |
Verifies the status of power supply fans and all fan trays. |
⏭️ Skipped |
VerifyEnvironmentCooling test is not supported on vEOS-lab |
| ISP-A-P7 |
Hardware |
VerifyEnvironmentPower |
Verifies the power supplies state and input voltage. |
⏭️ Skipped |
VerifyEnvironmentPower test is not supported on vEOS-lab |
| ISP-A-P7 |
Hardware |
VerifyEnvironmentSystemCooling |
Verifies the device's system cooling status. |
⏭️ Skipped |
VerifyEnvironmentSystemCooling test is not supported on vEOS-lab |
| ISP-A-P7 |
Hardware |
VerifyInventory |
Verifies the physical hardware inventory of the device. |
⏭️ Skipped |
VerifyInventory test is not supported on vEOS-lab |
| ISP-A-P7 |
Hardware |
VerifyTemperature |
Verifies if the device temperature is within acceptable limits. |
⏭️ Skipped |
VerifyTemperature test is not supported on vEOS-lab |
| ISP-A-P7 |
Hardware |
VerifyTransceiversManufacturers |
Verifies if all the transceivers come from approved manufacturers. |
⏭️ Skipped |
VerifyTransceiversManufacturers test is not supported on vEOS-lab |
| ISP-A-P7 |
Hardware |
VerifyTransceiversTemperature |
Verifies if all the transceivers are operating at an acceptable temperature. |
⏭️ Skipped |
VerifyTransceiversTemperature test is not supported on vEOS-lab |
| ISP-A-P8 |
Hardware |
VerifyEnvironmentCooling |
Verifies the status of power supply fans and all fan trays. |
⏭️ Skipped |
VerifyEnvironmentCooling test is not supported on vEOS-lab |
| ISP-A-P8 |
Hardware |
VerifyEnvironmentPower |
Verifies the power supplies state and input voltage. |
⏭️ Skipped |
VerifyEnvironmentPower test is not supported on vEOS-lab |
| ISP-A-P8 |
Hardware |
VerifyEnvironmentSystemCooling |
Verifies the device's system cooling status. |
⏭️ Skipped |
VerifyEnvironmentSystemCooling test is not supported on vEOS-lab |
| ISP-A-P8 |
Hardware |
VerifyInventory |
Verifies the physical hardware inventory of the device. |
⏭️ Skipped |
VerifyInventory test is not supported on vEOS-lab |
| ISP-A-P8 |
Hardware |
VerifyTemperature |
Verifies if the device temperature is within acceptable limits. |
⏭️ Skipped |
VerifyTemperature test is not supported on vEOS-lab |
| ISP-A-P8 |
Hardware |
VerifyTransceiversManufacturers |
Verifies if all the transceivers come from approved manufacturers. |
⏭️ Skipped |
VerifyTransceiversManufacturers test is not supported on vEOS-lab |
| ISP-A-P8 |
Hardware |
VerifyTransceiversTemperature |
Verifies if all the transceivers are operating at an acceptable temperature. |
⏭️ Skipped |
VerifyTransceiversTemperature test is not supported on vEOS-lab |
| ISP-A-PE1 |
Hardware |
VerifyEnvironmentCooling |
Verifies the status of power supply fans and all fan trays. |
⏭️ Skipped |
VerifyEnvironmentCooling test is not supported on vEOS-lab |
| ISP-A-PE1 |
Hardware |
VerifyEnvironmentPower |
Verifies the power supplies state and input voltage. |
⏭️ Skipped |
VerifyEnvironmentPower test is not supported on vEOS-lab |
| ISP-A-PE1 |
Hardware |
VerifyEnvironmentSystemCooling |
Verifies the device's system cooling status. |
⏭️ Skipped |
VerifyEnvironmentSystemCooling test is not supported on vEOS-lab |
| ISP-A-PE1 |
Hardware |
VerifyInventory |
Verifies the physical hardware inventory of the device. |
⏭️ Skipped |
VerifyInventory test is not supported on vEOS-lab |
| ISP-A-PE1 |
Hardware |
VerifyTemperature |
Verifies if the device temperature is within acceptable limits. |
⏭️ Skipped |
VerifyTemperature test is not supported on vEOS-lab |
| ISP-A-PE1 |
Hardware |
VerifyTransceiversManufacturers |
Verifies if all the transceivers come from approved manufacturers. |
⏭️ Skipped |
VerifyTransceiversManufacturers test is not supported on vEOS-lab |
| ISP-A-PE1 |
Hardware |
VerifyTransceiversTemperature |
Verifies if all the transceivers are operating at an acceptable temperature. |
⏭️ Skipped |
VerifyTransceiversTemperature test is not supported on vEOS-lab |
| ISP-A-PE2 |
Hardware |
VerifyEnvironmentCooling |
Verifies the status of power supply fans and all fan trays. |
⏭️ Skipped |
VerifyEnvironmentCooling test is not supported on vEOS-lab |
| ISP-A-PE2 |
Hardware |
VerifyEnvironmentPower |
Verifies the power supplies state and input voltage. |
⏭️ Skipped |
VerifyEnvironmentPower test is not supported on vEOS-lab |
| ISP-A-PE2 |
Hardware |
VerifyEnvironmentSystemCooling |
Verifies the device's system cooling status. |
⏭️ Skipped |
VerifyEnvironmentSystemCooling test is not supported on vEOS-lab |
| ISP-A-PE2 |
Hardware |
VerifyInventory |
Verifies the physical hardware inventory of the device. |
⏭️ Skipped |
VerifyInventory test is not supported on vEOS-lab |
| ISP-A-PE2 |
Hardware |
VerifyTemperature |
Verifies if the device temperature is within acceptable limits. |
⏭️ Skipped |
VerifyTemperature test is not supported on vEOS-lab |
| ISP-A-PE2 |
Hardware |
VerifyTransceiversManufacturers |
Verifies if all the transceivers come from approved manufacturers. |
⏭️ Skipped |
VerifyTransceiversManufacturers test is not supported on vEOS-lab |
| ISP-A-PE2 |
Hardware |
VerifyTransceiversTemperature |
Verifies if all the transceivers are operating at an acceptable temperature. |
⏭️ Skipped |
VerifyTransceiversTemperature test is not supported on vEOS-lab |
| ISP-A-PE3 |
Hardware |
VerifyEnvironmentCooling |
Verifies the status of power supply fans and all fan trays. |
⏭️ Skipped |
VerifyEnvironmentCooling test is not supported on vEOS-lab |
| ISP-A-PE3 |
Hardware |
VerifyEnvironmentPower |
Verifies the power supplies state and input voltage. |
⏭️ Skipped |
VerifyEnvironmentPower test is not supported on vEOS-lab |
| ISP-A-PE3 |
Hardware |
VerifyEnvironmentSystemCooling |
Verifies the device's system cooling status. |
⏭️ Skipped |
VerifyEnvironmentSystemCooling test is not supported on vEOS-lab |
| ISP-A-PE3 |
Hardware |
VerifyInventory |
Verifies the physical hardware inventory of the device. |
⏭️ Skipped |
VerifyInventory test is not supported on vEOS-lab |
| ISP-A-PE3 |
Hardware |
VerifyTemperature |
Verifies if the device temperature is within acceptable limits. |
⏭️ Skipped |
VerifyTemperature test is not supported on vEOS-lab |
| ISP-A-PE3 |
Hardware |
VerifyTransceiversManufacturers |
Verifies if all the transceivers come from approved manufacturers. |
⏭️ Skipped |
VerifyTransceiversManufacturers test is not supported on vEOS-lab |
| ISP-A-PE3 |
Hardware |
VerifyTransceiversTemperature |
Verifies if all the transceivers are operating at an acceptable temperature. |
⏭️ Skipped |
VerifyTransceiversTemperature test is not supported on vEOS-lab |
| ISP-A-PE4 |
Hardware |
VerifyEnvironmentCooling |
Verifies the status of power supply fans and all fan trays. |
⏭️ Skipped |
VerifyEnvironmentCooling test is not supported on vEOS-lab |
| ISP-A-PE4 |
Hardware |
VerifyEnvironmentPower |
Verifies the power supplies state and input voltage. |
⏭️ Skipped |
VerifyEnvironmentPower test is not supported on vEOS-lab |
| ISP-A-PE4 |
Hardware |
VerifyEnvironmentSystemCooling |
Verifies the device's system cooling status. |
⏭️ Skipped |
VerifyEnvironmentSystemCooling test is not supported on vEOS-lab |
| ISP-A-PE4 |
Hardware |
VerifyInventory |
Verifies the physical hardware inventory of the device. |
⏭️ Skipped |
VerifyInventory test is not supported on vEOS-lab |
| ISP-A-PE4 |
Hardware |
VerifyTemperature |
Verifies if the device temperature is within acceptable limits. |
⏭️ Skipped |
VerifyTemperature test is not supported on vEOS-lab |
| ISP-A-PE4 |
Hardware |
VerifyTransceiversManufacturers |
Verifies if all the transceivers come from approved manufacturers. |
⏭️ Skipped |
VerifyTransceiversManufacturers test is not supported on vEOS-lab |
| ISP-A-PE4 |
Hardware |
VerifyTransceiversTemperature |
Verifies if all the transceivers are operating at an acceptable temperature. |
⏭️ Skipped |
VerifyTransceiversTemperature test is not supported on vEOS-lab |
| ISP-A-P1 |
Configuration |
VerifyRunningConfigDiffs |
Verifies there is no difference between the running-config and the startup-config. |
✅ Success |
- |
| ISP-A-P1 |
Configuration |
VerifyZeroTouch |
Verifies ZeroTouch is disabled. |
✅ Success |
- |
| ISP-A-P1 |
Connectivity |
VerifyLLDPNeighbors |
Verifies the connection status of the specified LLDP (Link Layer Discovery Protocol) neighbors. |
✅ Success |
- |
| ISP-A-P1 |
Connectivity |
VerifyReachability |
Verifies point-to-point reachability between Ethernet interfaces. |
✅ Success |
- |
| ISP-A-P1 |
Interfaces |
VerifyInterfaceDiscards |
Verifies that the interfaces packet discard counters are equal to zero. |
✅ Success |
- |
| ISP-A-P1 |
Interfaces |
VerifyInterfaceErrDisabled |
Verifies there are no interfaces in the errdisabled state. |
✅ Success |
- |
| ISP-A-P1 |
Interfaces |
VerifyInterfaceErrors |
Verifies that the interfaces error counters are equal to zero. |
✅ Success |
- |
| ISP-A-P1 |
Interfaces |
VerifyInterfaceUtilization |
Verifies that the utilization of interfaces is below a certain threshold. |
✅ Success |
- |
| ISP-A-P1 |
Interfaces |
VerifyInterfacesStatus |
Verifies the operational states of specified interfaces to ensure they match expected configurations. |
✅ Success |
- |
| ISP-A-P1 |
OSPF |
VerifyOSPFMaxLSA |
Verifies all OSPF instances did not cross the maximum LSA threshold. |
✅ Success |
- |
| ISP-A-P1 |
OSPF |
VerifyOSPFNeighborState |
Verifies all OSPF neighbors are in FULL state. |
✅ Success |
- |
| ISP-A-P1 |
Routing |
VerifyRoutingProtocolModel |
Verifies the configured routing protocol model. |
✅ Success |
- |
| ISP-A-P1 |
STP |
VerifySTPCounters |
Verifies there is no errors in STP BPDU packets. |
✅ Success |
- |
| ISP-A-P1 |
System |
VerifyAgentLogs |
Verifies there are no agent crash reports. |
✅ Success |
- |
| ISP-A-P1 |
System |
VerifyCoredump |
Verifies there are no core dump files. |
✅ Success |
- |
| ISP-A-P1 |
System |
VerifyFileSystemUtilization |
Verifies that no partition is utilizing more than 75% of its disk space. |
✅ Success |
- |
| ISP-A-P1 |
System |
VerifyMaintenance |
Verifies that the device is not currently under or entering maintenance. |
✅ Success |
- |
| ISP-A-P1 |
System |
VerifyMemoryUtilization |
Verifies whether the memory utilization is below 75%. |
✅ Success |
- |
| ISP-A-P1 |
System |
VerifyReloadCause |
Verifies the last reload cause of the device. |
✅ Success |
- |
| ISP-A-P2 |
Configuration |
VerifyRunningConfigDiffs |
Verifies there is no difference between the running-config and the startup-config. |
✅ Success |
- |
| ISP-A-P2 |
Configuration |
VerifyZeroTouch |
Verifies ZeroTouch is disabled. |
✅ Success |
- |
| ISP-A-P2 |
Connectivity |
VerifyLLDPNeighbors |
Verifies the connection status of the specified LLDP (Link Layer Discovery Protocol) neighbors. |
✅ Success |
- |
| ISP-A-P2 |
Connectivity |
VerifyReachability |
Verifies point-to-point reachability between Ethernet interfaces. |
✅ Success |
- |
| ISP-A-P2 |
Interfaces |
VerifyInterfaceDiscards |
Verifies that the interfaces packet discard counters are equal to zero. |
✅ Success |
- |
| ISP-A-P2 |
Interfaces |
VerifyInterfaceErrDisabled |
Verifies there are no interfaces in the errdisabled state. |
✅ Success |
- |
| ISP-A-P2 |
Interfaces |
VerifyInterfaceErrors |
Verifies that the interfaces error counters are equal to zero. |
✅ Success |
- |
| ISP-A-P2 |
Interfaces |
VerifyInterfaceUtilization |
Verifies that the utilization of interfaces is below a certain threshold. |
✅ Success |
- |
| ISP-A-P2 |
Interfaces |
VerifyInterfacesStatus |
Verifies the operational states of specified interfaces to ensure they match expected configurations. |
✅ Success |
- |
| ISP-A-P2 |
OSPF |
VerifyOSPFMaxLSA |
Verifies all OSPF instances did not cross the maximum LSA threshold. |
✅ Success |
- |
| ISP-A-P2 |
OSPF |
VerifyOSPFNeighborState |
Verifies all OSPF neighbors are in FULL state. |
✅ Success |
- |
| ISP-A-P2 |
Routing |
VerifyRoutingProtocolModel |
Verifies the configured routing protocol model. |
✅ Success |
- |
| ISP-A-P2 |
STP |
VerifySTPCounters |
Verifies there is no errors in STP BPDU packets. |
✅ Success |
- |
| ISP-A-P2 |
System |
VerifyAgentLogs |
Verifies there are no agent crash reports. |
✅ Success |
- |
| ISP-A-P2 |
System |
VerifyCoredump |
Verifies there are no core dump files. |
✅ Success |
- |
| ISP-A-P2 |
System |
VerifyFileSystemUtilization |
Verifies that no partition is utilizing more than 75% of its disk space. |
✅ Success |
- |
| ISP-A-P2 |
System |
VerifyMaintenance |
Verifies that the device is not currently under or entering maintenance. |
✅ Success |
- |
| ISP-A-P2 |
System |
VerifyMemoryUtilization |
Verifies whether the memory utilization is below 75%. |
✅ Success |
- |
| ISP-A-P2 |
System |
VerifyReloadCause |
Verifies the last reload cause of the device. |
✅ Success |
- |
| ISP-A-P3 |
BGP |
VerifyBGPPeerSession |
Verifies the session state of BGP peers. |
✅ Success |
- |
| ISP-A-P3 |
Configuration |
VerifyRunningConfigDiffs |
Verifies there is no difference between the running-config and the startup-config. |
✅ Success |
- |
| ISP-A-P3 |
Configuration |
VerifyZeroTouch |
Verifies ZeroTouch is disabled. |
✅ Success |
- |
| ISP-A-P3 |
Connectivity |
VerifyLLDPNeighbors |
Verifies the connection status of the specified LLDP (Link Layer Discovery Protocol) neighbors. |
✅ Success |
- |
| ISP-A-P3 |
Connectivity |
VerifyReachability |
Verifies point-to-point reachability between Ethernet interfaces. |
✅ Success |
- |
| ISP-A-P3 |
Interfaces |
VerifyInterfaceDiscards |
Verifies that the interfaces packet discard counters are equal to zero. |
✅ Success |
- |
| ISP-A-P3 |
Interfaces |
VerifyInterfaceErrDisabled |
Verifies there are no interfaces in the errdisabled state. |
✅ Success |
- |
| ISP-A-P3 |
Interfaces |
VerifyInterfaceErrors |
Verifies that the interfaces error counters are equal to zero. |
✅ Success |
- |
| ISP-A-P3 |
Interfaces |
VerifyInterfaceUtilization |
Verifies that the utilization of interfaces is below a certain threshold. |
✅ Success |
- |
| ISP-A-P3 |
Interfaces |
VerifyInterfacesStatus |
Verifies the operational states of specified interfaces to ensure they match expected configurations. |
✅ Success |
- |
| ISP-A-P3 |
OSPF |
VerifyOSPFMaxLSA |
Verifies all OSPF instances did not cross the maximum LSA threshold. |
✅ Success |
- |
| ISP-A-P3 |
OSPF |
VerifyOSPFNeighborState |
Verifies all OSPF neighbors are in FULL state. |
✅ Success |
- |
| ISP-A-P3 |
Routing |
VerifyRoutingProtocolModel |
Verifies the configured routing protocol model. |
✅ Success |
- |
| ISP-A-P3 |
STP |
VerifySTPCounters |
Verifies there is no errors in STP BPDU packets. |
✅ Success |
- |
| ISP-A-P3 |
System |
VerifyAgentLogs |
Verifies there are no agent crash reports. |
✅ Success |
- |
| ISP-A-P3 |
System |
VerifyCoredump |
Verifies there are no core dump files. |
✅ Success |
- |
| ISP-A-P3 |
System |
VerifyFileSystemUtilization |
Verifies that no partition is utilizing more than 75% of its disk space. |
✅ Success |
- |
| ISP-A-P3 |
System |
VerifyMaintenance |
Verifies that the device is not currently under or entering maintenance. |
✅ Success |
- |
| ISP-A-P3 |
System |
VerifyMemoryUtilization |
Verifies whether the memory utilization is below 75%. |
✅ Success |
- |
| ISP-A-P3 |
System |
VerifyReloadCause |
Verifies the last reload cause of the device. |
✅ Success |
- |
| ISP-A-P4 |
BGP |
VerifyBGPPeerSession |
Verifies the session state of BGP peers. |
✅ Success |
- |
| ISP-A-P4 |
Configuration |
VerifyRunningConfigDiffs |
Verifies there is no difference between the running-config and the startup-config. |
✅ Success |
- |
| ISP-A-P4 |
Configuration |
VerifyZeroTouch |
Verifies ZeroTouch is disabled. |
✅ Success |
- |
| ISP-A-P4 |
Connectivity |
VerifyLLDPNeighbors |
Verifies the connection status of the specified LLDP (Link Layer Discovery Protocol) neighbors. |
✅ Success |
- |
| ISP-A-P4 |
Connectivity |
VerifyReachability |
Verifies point-to-point reachability between Ethernet interfaces. |
✅ Success |
- |
| ISP-A-P4 |
Interfaces |
VerifyInterfaceDiscards |
Verifies that the interfaces packet discard counters are equal to zero. |
✅ Success |
- |
| ISP-A-P4 |
Interfaces |
VerifyInterfaceErrDisabled |
Verifies there are no interfaces in the errdisabled state. |
✅ Success |
- |
| ISP-A-P4 |
Interfaces |
VerifyInterfaceErrors |
Verifies that the interfaces error counters are equal to zero. |
✅ Success |
- |
| ISP-A-P4 |
Interfaces |
VerifyInterfaceUtilization |
Verifies that the utilization of interfaces is below a certain threshold. |
✅ Success |
- |
| ISP-A-P4 |
Interfaces |
VerifyInterfacesStatus |
Verifies the operational states of specified interfaces to ensure they match expected configurations. |
✅ Success |
- |
| ISP-A-P4 |
OSPF |
VerifyOSPFMaxLSA |
Verifies all OSPF instances did not cross the maximum LSA threshold. |
✅ Success |
- |
| ISP-A-P4 |
OSPF |
VerifyOSPFNeighborState |
Verifies all OSPF neighbors are in FULL state. |
✅ Success |
- |
| ISP-A-P4 |
Routing |
VerifyRoutingProtocolModel |
Verifies the configured routing protocol model. |
✅ Success |
- |
| ISP-A-P4 |
STP |
VerifySTPCounters |
Verifies there is no errors in STP BPDU packets. |
✅ Success |
- |
| ISP-A-P4 |
System |
VerifyAgentLogs |
Verifies there are no agent crash reports. |
✅ Success |
- |
| ISP-A-P4 |
System |
VerifyCoredump |
Verifies there are no core dump files. |
✅ Success |
- |
| ISP-A-P4 |
System |
VerifyFileSystemUtilization |
Verifies that no partition is utilizing more than 75% of its disk space. |
✅ Success |
- |
| ISP-A-P4 |
System |
VerifyMaintenance |
Verifies that the device is not currently under or entering maintenance. |
✅ Success |
- |
| ISP-A-P4 |
System |
VerifyMemoryUtilization |
Verifies whether the memory utilization is below 75%. |
✅ Success |
- |
| ISP-A-P4 |
System |
VerifyReloadCause |
Verifies the last reload cause of the device. |
✅ Success |
- |
| ISP-A-P5 |
BGP |
VerifyBGPPeerSession |
Verifies the session state of BGP peers. |
✅ Success |
- |
| ISP-A-P5 |
Configuration |
VerifyRunningConfigDiffs |
Verifies there is no difference between the running-config and the startup-config. |
✅ Success |
- |
| ISP-A-P5 |
Configuration |
VerifyZeroTouch |
Verifies ZeroTouch is disabled. |
✅ Success |
- |
| ISP-A-P5 |
Connectivity |
VerifyLLDPNeighbors |
Verifies the connection status of the specified LLDP (Link Layer Discovery Protocol) neighbors. |
✅ Success |
- |
| ISP-A-P5 |
Connectivity |
VerifyReachability |
Verifies point-to-point reachability between Ethernet interfaces. |
✅ Success |
- |
| ISP-A-P5 |
Interfaces |
VerifyInterfaceDiscards |
Verifies that the interfaces packet discard counters are equal to zero. |
✅ Success |
- |
| ISP-A-P5 |
Interfaces |
VerifyInterfaceErrDisabled |
Verifies there are no interfaces in the errdisabled state. |
✅ Success |
- |
| ISP-A-P5 |
Interfaces |
VerifyInterfaceErrors |
Verifies that the interfaces error counters are equal to zero. |
✅ Success |
- |
| ISP-A-P5 |
Interfaces |
VerifyInterfaceUtilization |
Verifies that the utilization of interfaces is below a certain threshold. |
✅ Success |
- |
| ISP-A-P5 |
Interfaces |
VerifyInterfacesStatus |
Verifies the operational states of specified interfaces to ensure they match expected configurations. |
✅ Success |
- |
| ISP-A-P5 |
OSPF |
VerifyOSPFMaxLSA |
Verifies all OSPF instances did not cross the maximum LSA threshold. |
✅ Success |
- |
| ISP-A-P5 |
OSPF |
VerifyOSPFNeighborState |
Verifies all OSPF neighbors are in FULL state. |
✅ Success |
- |
| ISP-A-P5 |
Routing |
VerifyRoutingProtocolModel |
Verifies the configured routing protocol model. |
✅ Success |
- |
| ISP-A-P5 |
STP |
VerifySTPCounters |
Verifies there is no errors in STP BPDU packets. |
✅ Success |
- |
| ISP-A-P5 |
System |
VerifyAgentLogs |
Verifies there are no agent crash reports. |
✅ Success |
- |
| ISP-A-P5 |
System |
VerifyCoredump |
Verifies there are no core dump files. |
✅ Success |
- |
| ISP-A-P5 |
System |
VerifyFileSystemUtilization |
Verifies that no partition is utilizing more than 75% of its disk space. |
✅ Success |
- |
| ISP-A-P5 |
System |
VerifyMaintenance |
Verifies that the device is not currently under or entering maintenance. |
✅ Success |
- |
| ISP-A-P5 |
System |
VerifyMemoryUtilization |
Verifies whether the memory utilization is below 75%. |
✅ Success |
- |
| ISP-A-P5 |
System |
VerifyReloadCause |
Verifies the last reload cause of the device. |
✅ Success |
- |
| ISP-A-P6 |
BGP |
VerifyBGPPeerSession |
Verifies the session state of BGP peers. |
✅ Success |
- |
| ISP-A-P6 |
Configuration |
VerifyRunningConfigDiffs |
Verifies there is no difference between the running-config and the startup-config. |
✅ Success |
- |
| ISP-A-P6 |
Configuration |
VerifyZeroTouch |
Verifies ZeroTouch is disabled. |
✅ Success |
- |
| ISP-A-P6 |
Connectivity |
VerifyLLDPNeighbors |
Verifies the connection status of the specified LLDP (Link Layer Discovery Protocol) neighbors. |
✅ Success |
- |
| ISP-A-P6 |
Connectivity |
VerifyReachability |
Verifies point-to-point reachability between Ethernet interfaces. |
✅ Success |
- |
| ISP-A-P6 |
Interfaces |
VerifyInterfaceDiscards |
Verifies that the interfaces packet discard counters are equal to zero. |
✅ Success |
- |
| ISP-A-P6 |
Interfaces |
VerifyInterfaceErrDisabled |
Verifies there are no interfaces in the errdisabled state. |
✅ Success |
- |
| ISP-A-P6 |
Interfaces |
VerifyInterfaceErrors |
Verifies that the interfaces error counters are equal to zero. |
✅ Success |
- |
| ISP-A-P6 |
Interfaces |
VerifyInterfaceUtilization |
Verifies that the utilization of interfaces is below a certain threshold. |
✅ Success |
- |
| ISP-A-P6 |
Interfaces |
VerifyInterfacesStatus |
Verifies the operational states of specified interfaces to ensure they match expected configurations. |
✅ Success |
- |
| ISP-A-P6 |
OSPF |
VerifyOSPFMaxLSA |
Verifies all OSPF instances did not cross the maximum LSA threshold. |
✅ Success |
- |
| ISP-A-P6 |
OSPF |
VerifyOSPFNeighborState |
Verifies all OSPF neighbors are in FULL state. |
✅ Success |
- |
| ISP-A-P6 |
Routing |
VerifyRoutingProtocolModel |
Verifies the configured routing protocol model. |
✅ Success |
- |
| ISP-A-P6 |
STP |
VerifySTPCounters |
Verifies there is no errors in STP BPDU packets. |
✅ Success |
- |
| ISP-A-P6 |
System |
VerifyAgentLogs |
Verifies there are no agent crash reports. |
✅ Success |
- |
| ISP-A-P6 |
System |
VerifyCoredump |
Verifies there are no core dump files. |
✅ Success |
- |
| ISP-A-P6 |
System |
VerifyFileSystemUtilization |
Verifies that no partition is utilizing more than 75% of its disk space. |
✅ Success |
- |
| ISP-A-P6 |
System |
VerifyMaintenance |
Verifies that the device is not currently under or entering maintenance. |
✅ Success |
- |
| ISP-A-P6 |
System |
VerifyMemoryUtilization |
Verifies whether the memory utilization is below 75%. |
✅ Success |
- |
| ISP-A-P6 |
System |
VerifyReloadCause |
Verifies the last reload cause of the device. |
✅ Success |
- |
| ISP-A-P7 |
Configuration |
VerifyRunningConfigDiffs |
Verifies there is no difference between the running-config and the startup-config. |
✅ Success |
- |
| ISP-A-P7 |
Configuration |
VerifyZeroTouch |
Verifies ZeroTouch is disabled. |
✅ Success |
- |
| ISP-A-P7 |
Connectivity |
VerifyLLDPNeighbors |
Verifies the connection status of the specified LLDP (Link Layer Discovery Protocol) neighbors. |
✅ Success |
- |
| ISP-A-P7 |
Connectivity |
VerifyReachability |
Verifies point-to-point reachability between Ethernet interfaces. |
✅ Success |
- |
| ISP-A-P7 |
Interfaces |
VerifyInterfaceDiscards |
Verifies that the interfaces packet discard counters are equal to zero. |
✅ Success |
- |
| ISP-A-P7 |
Interfaces |
VerifyInterfaceErrDisabled |
Verifies there are no interfaces in the errdisabled state. |
✅ Success |
- |
| ISP-A-P7 |
Interfaces |
VerifyInterfaceErrors |
Verifies that the interfaces error counters are equal to zero. |
✅ Success |
- |
| ISP-A-P7 |
Interfaces |
VerifyInterfaceUtilization |
Verifies that the utilization of interfaces is below a certain threshold. |
✅ Success |
- |
| ISP-A-P7 |
Interfaces |
VerifyInterfacesStatus |
Verifies the operational states of specified interfaces to ensure they match expected configurations. |
✅ Success |
- |
| ISP-A-P7 |
OSPF |
VerifyOSPFMaxLSA |
Verifies all OSPF instances did not cross the maximum LSA threshold. |
✅ Success |
- |
| ISP-A-P7 |
OSPF |
VerifyOSPFNeighborState |
Verifies all OSPF neighbors are in FULL state. |
✅ Success |
- |
| ISP-A-P7 |
Routing |
VerifyRoutingProtocolModel |
Verifies the configured routing protocol model. |
✅ Success |
- |
| ISP-A-P7 |
STP |
VerifySTPCounters |
Verifies there is no errors in STP BPDU packets. |
✅ Success |
- |
| ISP-A-P7 |
System |
VerifyAgentLogs |
Verifies there are no agent crash reports. |
✅ Success |
- |
| ISP-A-P7 |
System |
VerifyCoredump |
Verifies there are no core dump files. |
✅ Success |
- |
| ISP-A-P7 |
System |
VerifyFileSystemUtilization |
Verifies that no partition is utilizing more than 75% of its disk space. |
✅ Success |
- |
| ISP-A-P7 |
System |
VerifyMaintenance |
Verifies that the device is not currently under or entering maintenance. |
✅ Success |
- |
| ISP-A-P7 |
System |
VerifyMemoryUtilization |
Verifies whether the memory utilization is below 75%. |
✅ Success |
- |
| ISP-A-P7 |
System |
VerifyReloadCause |
Verifies the last reload cause of the device. |
✅ Success |
- |
| ISP-A-P8 |
Configuration |
VerifyRunningConfigDiffs |
Verifies there is no difference between the running-config and the startup-config. |
✅ Success |
- |
| ISP-A-P8 |
Configuration |
VerifyZeroTouch |
Verifies ZeroTouch is disabled. |
✅ Success |
- |
| ISP-A-P8 |
Connectivity |
VerifyLLDPNeighbors |
Verifies the connection status of the specified LLDP (Link Layer Discovery Protocol) neighbors. |
✅ Success |
- |
| ISP-A-P8 |
Connectivity |
VerifyReachability |
Verifies point-to-point reachability between Ethernet interfaces. |
✅ Success |
- |
| ISP-A-P8 |
Interfaces |
VerifyInterfaceDiscards |
Verifies that the interfaces packet discard counters are equal to zero. |
✅ Success |
- |
| ISP-A-P8 |
Interfaces |
VerifyInterfaceErrDisabled |
Verifies there are no interfaces in the errdisabled state. |
✅ Success |
- |
| ISP-A-P8 |
Interfaces |
VerifyInterfaceErrors |
Verifies that the interfaces error counters are equal to zero. |
✅ Success |
- |
| ISP-A-P8 |
Interfaces |
VerifyInterfaceUtilization |
Verifies that the utilization of interfaces is below a certain threshold. |
✅ Success |
- |
| ISP-A-P8 |
Interfaces |
VerifyInterfacesStatus |
Verifies the operational states of specified interfaces to ensure they match expected configurations. |
✅ Success |
- |
| ISP-A-P8 |
OSPF |
VerifyOSPFMaxLSA |
Verifies all OSPF instances did not cross the maximum LSA threshold. |
✅ Success |
- |
| ISP-A-P8 |
OSPF |
VerifyOSPFNeighborState |
Verifies all OSPF neighbors are in FULL state. |
✅ Success |
- |
| ISP-A-P8 |
Routing |
VerifyRoutingProtocolModel |
Verifies the configured routing protocol model. |
✅ Success |
- |
| ISP-A-P8 |
STP |
VerifySTPCounters |
Verifies there is no errors in STP BPDU packets. |
✅ Success |
- |
| ISP-A-P8 |
System |
VerifyAgentLogs |
Verifies there are no agent crash reports. |
✅ Success |
- |
| ISP-A-P8 |
System |
VerifyCoredump |
Verifies there are no core dump files. |
✅ Success |
- |
| ISP-A-P8 |
System |
VerifyFileSystemUtilization |
Verifies that no partition is utilizing more than 75% of its disk space. |
✅ Success |
- |
| ISP-A-P8 |
System |
VerifyMaintenance |
Verifies that the device is not currently under or entering maintenance. |
✅ Success |
- |
| ISP-A-P8 |
System |
VerifyMemoryUtilization |
Verifies whether the memory utilization is below 75%. |
✅ Success |
- |
| ISP-A-P8 |
System |
VerifyReloadCause |
Verifies the last reload cause of the device. |
✅ Success |
- |
| ISP-A-PE1 |
BGP |
VerifyBGPPeerSession |
Verifies the session state of BGP peers. |
✅ Success |
- |
| ISP-A-PE1 |
Configuration |
VerifyRunningConfigDiffs |
Verifies there is no difference between the running-config and the startup-config. |
✅ Success |
- |
| ISP-A-PE1 |
Configuration |
VerifyZeroTouch |
Verifies ZeroTouch is disabled. |
✅ Success |
- |
| ISP-A-PE1 |
Connectivity |
VerifyLLDPNeighbors |
Verifies the connection status of the specified LLDP (Link Layer Discovery Protocol) neighbors. |
✅ Success |
- |
| ISP-A-PE1 |
Connectivity |
VerifyReachability |
Verifies point-to-point reachability between Ethernet interfaces. |
✅ Success |
- |
| ISP-A-PE1 |
Interfaces |
VerifyInterfaceDiscards |
Verifies that the interfaces packet discard counters are equal to zero. |
✅ Success |
- |
| ISP-A-PE1 |
Interfaces |
VerifyInterfaceErrDisabled |
Verifies there are no interfaces in the errdisabled state. |
✅ Success |
- |
| ISP-A-PE1 |
Interfaces |
VerifyInterfaceErrors |
Verifies that the interfaces error counters are equal to zero. |
✅ Success |
- |
| ISP-A-PE1 |
Interfaces |
VerifyInterfaceUtilization |
Verifies that the utilization of interfaces is below a certain threshold. |
✅ Success |
- |
| ISP-A-PE1 |
Interfaces |
VerifyInterfacesStatus |
Verifies the operational states of specified interfaces to ensure they match expected configurations. |
✅ Success |
- |
| ISP-A-PE1 |
OSPF |
VerifyOSPFMaxLSA |
Verifies all OSPF instances did not cross the maximum LSA threshold. |
✅ Success |
- |
| ISP-A-PE1 |
OSPF |
VerifyOSPFNeighborState |
Verifies all OSPF neighbors are in FULL state. |
✅ Success |
- |
| ISP-A-PE1 |
Routing |
VerifyRoutingProtocolModel |
Verifies the configured routing protocol model. |
✅ Success |
- |
| ISP-A-PE1 |
STP |
VerifySTPCounters |
Verifies there is no errors in STP BPDU packets. |
✅ Success |
- |
| ISP-A-PE1 |
System |
VerifyAgentLogs |
Verifies there are no agent crash reports. |
✅ Success |
- |
| ISP-A-PE1 |
System |
VerifyCoredump |
Verifies there are no core dump files. |
✅ Success |
- |
| ISP-A-PE1 |
System |
VerifyFileSystemUtilization |
Verifies that no partition is utilizing more than 75% of its disk space. |
✅ Success |
- |
| ISP-A-PE1 |
System |
VerifyMaintenance |
Verifies that the device is not currently under or entering maintenance. |
✅ Success |
- |
| ISP-A-PE1 |
System |
VerifyMemoryUtilization |
Verifies whether the memory utilization is below 75%. |
✅ Success |
- |
| ISP-A-PE1 |
System |
VerifyReloadCause |
Verifies the last reload cause of the device. |
✅ Success |
- |
| ISP-A-PE2 |
BGP |
VerifyBGPPeerSession |
Verifies the session state of BGP peers. |
✅ Success |
- |
| ISP-A-PE2 |
Configuration |
VerifyRunningConfigDiffs |
Verifies there is no difference between the running-config and the startup-config. |
✅ Success |
- |
| ISP-A-PE2 |
Configuration |
VerifyZeroTouch |
Verifies ZeroTouch is disabled. |
✅ Success |
- |
| ISP-A-PE2 |
Connectivity |
VerifyLLDPNeighbors |
Verifies the connection status of the specified LLDP (Link Layer Discovery Protocol) neighbors. |
✅ Success |
- |
| ISP-A-PE2 |
Connectivity |
VerifyReachability |
Verifies point-to-point reachability between Ethernet interfaces. |
✅ Success |
- |
| ISP-A-PE2 |
Interfaces |
VerifyInterfaceDiscards |
Verifies that the interfaces packet discard counters are equal to zero. |
✅ Success |
- |
| ISP-A-PE2 |
Interfaces |
VerifyInterfaceErrDisabled |
Verifies there are no interfaces in the errdisabled state. |
✅ Success |
- |
| ISP-A-PE2 |
Interfaces |
VerifyInterfaceErrors |
Verifies that the interfaces error counters are equal to zero. |
✅ Success |
- |
| ISP-A-PE2 |
Interfaces |
VerifyInterfaceUtilization |
Verifies that the utilization of interfaces is below a certain threshold. |
✅ Success |
- |
| ISP-A-PE2 |
Interfaces |
VerifyInterfacesStatus |
Verifies the operational states of specified interfaces to ensure they match expected configurations. |
✅ Success |
- |
| ISP-A-PE2 |
OSPF |
VerifyOSPFMaxLSA |
Verifies all OSPF instances did not cross the maximum LSA threshold. |
✅ Success |
- |
| ISP-A-PE2 |
OSPF |
VerifyOSPFNeighborState |
Verifies all OSPF neighbors are in FULL state. |
✅ Success |
- |
| ISP-A-PE2 |
Routing |
VerifyRoutingProtocolModel |
Verifies the configured routing protocol model. |
✅ Success |
- |
| ISP-A-PE2 |
STP |
VerifySTPCounters |
Verifies there is no errors in STP BPDU packets. |
✅ Success |
- |
| ISP-A-PE2 |
System |
VerifyAgentLogs |
Verifies there are no agent crash reports. |
✅ Success |
- |
| ISP-A-PE2 |
System |
VerifyCoredump |
Verifies there are no core dump files. |
✅ Success |
- |
| ISP-A-PE2 |
System |
VerifyFileSystemUtilization |
Verifies that no partition is utilizing more than 75% of its disk space. |
✅ Success |
- |
| ISP-A-PE2 |
System |
VerifyMaintenance |
Verifies that the device is not currently under or entering maintenance. |
✅ Success |
- |
| ISP-A-PE2 |
System |
VerifyMemoryUtilization |
Verifies whether the memory utilization is below 75%. |
✅ Success |
- |
| ISP-A-PE2 |
System |
VerifyReloadCause |
Verifies the last reload cause of the device. |
✅ Success |
- |
| ISP-A-PE3 |
BGP |
VerifyBGPPeerSession |
Verifies the session state of BGP peers. |
✅ Success |
- |
| ISP-A-PE3 |
Configuration |
VerifyRunningConfigDiffs |
Verifies there is no difference between the running-config and the startup-config. |
✅ Success |
- |
| ISP-A-PE3 |
Configuration |
VerifyZeroTouch |
Verifies ZeroTouch is disabled. |
✅ Success |
- |
| ISP-A-PE3 |
Connectivity |
VerifyLLDPNeighbors |
Verifies the connection status of the specified LLDP (Link Layer Discovery Protocol) neighbors. |
✅ Success |
- |
| ISP-A-PE3 |
Connectivity |
VerifyReachability |
Verifies point-to-point reachability between Ethernet interfaces. |
✅ Success |
- |
| ISP-A-PE3 |
Interfaces |
VerifyInterfaceDiscards |
Verifies that the interfaces packet discard counters are equal to zero. |
✅ Success |
- |
| ISP-A-PE3 |
Interfaces |
VerifyInterfaceErrDisabled |
Verifies there are no interfaces in the errdisabled state. |
✅ Success |
- |
| ISP-A-PE3 |
Interfaces |
VerifyInterfaceErrors |
Verifies that the interfaces error counters are equal to zero. |
✅ Success |
- |
| ISP-A-PE3 |
Interfaces |
VerifyInterfaceUtilization |
Verifies that the utilization of interfaces is below a certain threshold. |
✅ Success |
- |
| ISP-A-PE3 |
Interfaces |
VerifyInterfacesStatus |
Verifies the operational states of specified interfaces to ensure they match expected configurations. |
✅ Success |
- |
| ISP-A-PE3 |
OSPF |
VerifyOSPFMaxLSA |
Verifies all OSPF instances did not cross the maximum LSA threshold. |
✅ Success |
- |
| ISP-A-PE3 |
OSPF |
VerifyOSPFNeighborState |
Verifies all OSPF neighbors are in FULL state. |
✅ Success |
- |
| ISP-A-PE3 |
Routing |
VerifyRoutingProtocolModel |
Verifies the configured routing protocol model. |
✅ Success |
- |
| ISP-A-PE3 |
STP |
VerifySTPCounters |
Verifies there is no errors in STP BPDU packets. |
✅ Success |
- |
| ISP-A-PE3 |
System |
VerifyAgentLogs |
Verifies there are no agent crash reports. |
✅ Success |
- |
| ISP-A-PE3 |
System |
VerifyCoredump |
Verifies there are no core dump files. |
✅ Success |
- |
| ISP-A-PE3 |
System |
VerifyFileSystemUtilization |
Verifies that no partition is utilizing more than 75% of its disk space. |
✅ Success |
- |
| ISP-A-PE3 |
System |
VerifyMaintenance |
Verifies that the device is not currently under or entering maintenance. |
✅ Success |
- |
| ISP-A-PE3 |
System |
VerifyMemoryUtilization |
Verifies whether the memory utilization is below 75%. |
✅ Success |
- |
| ISP-A-PE3 |
System |
VerifyReloadCause |
Verifies the last reload cause of the device. |
✅ Success |
- |
| ISP-A-PE4 |
BGP |
VerifyBGPPeerSession |
Verifies the session state of BGP peers. |
✅ Success |
- |
| ISP-A-PE4 |
Configuration |
VerifyRunningConfigDiffs |
Verifies there is no difference between the running-config and the startup-config. |
✅ Success |
- |
| ISP-A-PE4 |
Configuration |
VerifyZeroTouch |
Verifies ZeroTouch is disabled. |
✅ Success |
- |
| ISP-A-PE4 |
Connectivity |
VerifyLLDPNeighbors |
Verifies the connection status of the specified LLDP (Link Layer Discovery Protocol) neighbors. |
✅ Success |
- |
| ISP-A-PE4 |
Connectivity |
VerifyReachability |
Verifies point-to-point reachability between Ethernet interfaces. |
✅ Success |
- |
| ISP-A-PE4 |
Interfaces |
VerifyInterfaceDiscards |
Verifies that the interfaces packet discard counters are equal to zero. |
✅ Success |
- |
| ISP-A-PE4 |
Interfaces |
VerifyInterfaceErrDisabled |
Verifies there are no interfaces in the errdisabled state. |
✅ Success |
- |
| ISP-A-PE4 |
Interfaces |
VerifyInterfaceErrors |
Verifies that the interfaces error counters are equal to zero. |
✅ Success |
- |
| ISP-A-PE4 |
Interfaces |
VerifyInterfaceUtilization |
Verifies that the utilization of interfaces is below a certain threshold. |
✅ Success |
- |
| ISP-A-PE4 |
Interfaces |
VerifyInterfacesStatus |
Verifies the operational states of specified interfaces to ensure they match expected configurations. |
✅ Success |
- |
| ISP-A-PE4 |
OSPF |
VerifyOSPFMaxLSA |
Verifies all OSPF instances did not cross the maximum LSA threshold. |
✅ Success |
- |
| ISP-A-PE4 |
OSPF |
VerifyOSPFNeighborState |
Verifies all OSPF neighbors are in FULL state. |
✅ Success |
- |
| ISP-A-PE4 |
Routing |
VerifyRoutingProtocolModel |
Verifies the configured routing protocol model. |
✅ Success |
- |
| ISP-A-PE4 |
STP |
VerifySTPCounters |
Verifies there is no errors in STP BPDU packets. |
✅ Success |
- |
| ISP-A-PE4 |
System |
VerifyAgentLogs |
Verifies there are no agent crash reports. |
✅ Success |
- |
| ISP-A-PE4 |
System |
VerifyCoredump |
Verifies there are no core dump files. |
✅ Success |
- |
| ISP-A-PE4 |
System |
VerifyFileSystemUtilization |
Verifies that no partition is utilizing more than 75% of its disk space. |
✅ Success |
- |
| ISP-A-PE4 |
System |
VerifyMaintenance |
Verifies that the device is not currently under or entering maintenance. |
✅ Success |
- |
| ISP-A-PE4 |
System |
VerifyMemoryUtilization |
Verifies whether the memory utilization is below 75%. |
✅ Success |
- |
| ISP-A-PE4 |
System |
VerifyReloadCause |
Verifies the last reload cause of the device. |
✅ Success |
- |